corrosion products造句

• Extensive corrosion product was found on all surfaces .
  在所有表面上都发现了大范围的锈蚀。
• Collection and identification of corrosion products
  腐蚀产物的采集与鉴定
• Corrosion of metals and alloys - removal of corrosion products from corrosion test specimens
  腐蚀试样上腐蚀产物的清除
• Method for removal of corrosion products from corrosion test specimens of metals and alloys
  从金属和合金腐蚀试样去除腐蚀制品的方法
• Corrosion of metals and alloys - removal of corrosion products from corrosion test specimens
  金属与合金的腐蚀.腐蚀试样中腐蚀生成物的清除
• Industrial circulating cooling water - determination of water for sludge and corrosion products
  工业循环冷却水污垢和腐蚀产物中水分含量的测定
• Principle for sludge and corrosion product analytical methods of industrial circulating cooling water
  工业循环冷却水污垢和腐蚀产物分析方法规则
• Industrial circulating cooling water - determination of sulphates for sludge and corrosion products
  工业循环冷却水污垢和腐蚀产物中硫酸盐含量测定方法
• Industrial circulating cooling water - determination of ignition - loss for sludge and corrosion products
  工业循环冷却水污垢和腐蚀产物中灼烧失重测定方法
• Industrial circulating cooling water - determination of ferrous sulphide for sludge and corrosion products
  工业循环冷却水污垢和腐蚀产物中硫化亚铁含量的测定
• Industrial circulating cooling water - surveys , sampling and production for sludge and corrosion products
  工业循环冷却水污垢和腐蚀产物.试样的调查采取和制备
• Industrial circulating cooling water - determination of carbon dioxide for sludge and corrosion products
  工业循环冷却水污垢和腐蚀产物中二氧化碳含量的测定方法
• The results of visual inspection , microscopic inspection and corrosion product analysis revealed that stress corrosion was the main cause of the grid collapse
  通过对断裂钢丝进行宏观、显微及腐蚀产物的分析，确定钢丝断裂的主要原因为应力腐蚀开裂。
• Corrosion of metals - methods for evaluation of efficiency of water treatment apparatus for corrosion protection - part 2 : apparatus for decreasing of emission of corrosion products to drinking water
  金属的腐蚀.水处理设备腐蚀防护效果的评定方法.第2部
• Industrial circulating cooling water - determination of undissolved material in acid , phosphorus , ferrum , aluminium , calcium , magnesium , zinc and copper for sludge and corrosion products
  工业循环冷却水污垢和腐蚀产物中酸不溶物磷铁铝钙镁锌铜含量测定方法
• Corrosion of metals - methods for evaluation of efficiency of water treatment apparatus for corrosion protection - part 3 : field corrosion test for removal of corrosion products in incrusted water installations
  金属的腐蚀.腐蚀防护用水处理仪器效果的评定方法.第3
• Subsequently , the crystal structure and type of iron sulphide changed gradually , there existed crannies in corrosion products , resulting the increase of corrosion rate
  初期硫化物生成，腐蚀速度变化不大，后期随着硫化物的增加，不再具有保护性，而使腐蚀速度加快。
• Corrosion of metals - methods for evaluation of efficiency of water treatment apparatus for corrosion protection - part 4 : laboratory corrosion test for removal of corrosion products in incrusted water installations
  金属腐蚀.水处理设备腐蚀防护效果的评估方法.第4部分
• Preparation of steel substrates before application of paints and related products - tests for the assessment of surface cleanliness - field test for soluble iron corrosion products
  涂料和相关产品涂敷之前钢基材的备制处理.表面清洁度的评估试验.可溶解铁腐蚀产品的现场试验
• Secondly , by loading a pressure simulate the corrosion product induced expansive effect on concrete around rebar . ansys that is a famous fea software is used for analysis a real model
  其次，用外加荷载法模拟钢筋均匀锈蚀膨胀过程，通过ansys有限元程序对真实模型进行有限元分析，研究影响保护层胀裂所需膨胀力的因素。